|Place of Origin:||China|
|Minimum Order Quantity:||1pc|
|Packaging Details:||Wooden Case|
|Delivery Time:||20-25 days|
|Payment Terms:||T/T, Western Union, MoneyGram,Paypal,Payonner|
|Type:||Brinell Hardness Tester||Testing Range:||3.18 HBW-658 HBW|
|Power Supply:||AC220V/50Hz；110V/60Hz ,4A||Tungsten Carbide Ball Indenter:||10mm|
|Max Measurable Height:||230mm||Max Measurable Depth:||140mm|
Automatic Electric Brinell Hardness Tester BH-3000L 20X Microscope
The Brinell hardness testing creates the largest indentation comparing all other hardness testing methods. It is able to reflect the comprehensive features of the material, and is unaffected by the microstructure and inhomogeneous of the specimen. So it with high precision and widely used in industry such as metallurgy, forging, casting, unhardened steel and nonferrous metals, as well as in the laboratories, universities , and scientific research institutes.
BH-3000L Tester conforms to:
ISO6506 Metallic Materials-Brinell Hardness Test
l ASTM E-10 Test Method for Brinell Hardness of Metallic Materials
--Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.
--The whole weight of the tester is 50% less than the traditional dead weights type tester.
--Test load selection by keyboard and LCD screen. No need of handling heavy weights or cleaning the messy oil.
--Fully automatic test cycles. The hardness Tester features a fully automatic test cycle, load application, holding, unloading, is performed fully automaticly. This greatly improves reproducibility of test results since operator influence is eliminated.
--Selectable dwell times by screen. The indenter, load, and other test informations are showing clearly on the large LCD screen.
--The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen.
--20X Microscope with LED lighting source make the indention more distinguishable and improving the measure accurate.
|Load dwell duration:2s~99s, can be set and stored|
|Tungsten carbide ball indenter.10mm|
|Accuracy of indention measuring : ±0.5%|
|Magnification of the microscope : 20X|
|Resolution capability of the microscope: 0.005mm|
|Accuracy of Brinell Hardness Value|
|Hardness range (HBW)||Error(%)||Repeatability(%)|
|Max measurable height 230mm|
|Max measurable depth 140mm|
|Power supply: 220/110v,50/60Hz,4A|
|Standard Blocks: 125-350HBW10/3000, 125-350HBW10/1000|
|Host machine||1||Flat anvil||1|
|Standard block 125-350HBW10/3000||1||“V”shape anvil||1|
|Standard block 125-350HBW10/1000||1||20x microscope||1|
|Φ10mm Tungsten carbide ball indenter||1||Power supply wire||1|
|Mounting screws for indenter||1||Dust cover||1|
|Screwdriver for indenter mounting||1|
|Standard blocks of other value||Φ2.5mm Tungsten carbide ball|
|Φ5mm Tungsten carbide ball indenter||Φ2.5mm Tungsten carbide ball indenter|
|Φ10mm Tungsten carbide ball||Φ5mm Tungsten carbide ball|