Rapid Tes Rockwell Hardness Tester 420mm Indenter Stroke For Very Soft Materials

Rapid Test Rockwell Hardness Tester AT130D

Description

Even operating following to the Rockwell principle according to DIN and ASTM, measuring is not influenced by deflections. The reference point is the surface of the component itself. Surface preparation is needed only where measuring takes place. With an easy movement of the lever pre-load and load are applied. With the return movement, load is taken away, and reading is made. Measuring takes no more than 3sec. (a few sec. more for very soft materials).

Working principle: Rockwell

Preload: 10kgf (98N)

Loads: 60kgf, 62.5kgf, 100kgf, 125kgf, 150kgf, 187,5kgf (N 588, 613, 981, 1226, 1471, 1839)

Load time: manual selection

Standard scales: HRA, HRB, HRC, HRD, HRF, HRG

Kg/mm²-N/mm²

HBW2.5/187.5-HRW2.5/62.5

Measuring range:10-70HRC

Indenter protective cover: diameter 11mm,height 14mm

Indenter extension rod: 100mm(can customized)

Indenter stroke:420mm

Load time: 2-3 seconds

Reading: on display

Output interfaces: RS232

Working conditions: 0°C-50°C

Accuracy : Rockwell - ASTM E-18 - ISO6508

Testing space: testing throat depth 220mm,max height 420mm

Load application method: manual with automatic pre load application

Minimum measurable diameter: 3mm

Selectable functions: scales, tolerances, calibration,error alarm

Power supply: 100-240VAC,50/60HZ 18W

Working area dimensions: STAND TX: Max. measurable height:240mm ,depth: 560mm, height: 875

Specimen dimension:240x335mm or 340x450mm

Gross Weight: 97KG