Stainless Steel Easy to Read Digital Welding Inspection Gauges with Data Output Interface

Digital welding Gauge

Use to 

Measure fillet weld.

Measure weld throat thickness.

Precision design, for measuring of flat welding seams and welding seams in corners.In order to observe the required V-seam-angle at flat welds, the angles of 60°, 70°, 80°and 90° are attached at the gauge.

Abilities:

Holds either the zero setting or measured value at any position for diffrential measurements.

Has a serial output to interface with a computer or printer to process data.

Automatically turns on by moving the main sacle or by pressing ON/OFF key.

Automatically turns off after 4 minutes of inactivity…conserving battery power.

Features:

Measures Butt Weld Reinforcement

Measures Throat

Stainless steel,Hardened and ground

Turn on/off,Switchable mm/inch

Measured value showed on a big LCD-Display

Reading +/- 0,01 mm

Power supply: Battery 1.5 V, LR44 SW

With data output interface

Function:

1. Zero setting at any position
2. Metric/ Inch system conversion at any
position
3. The digital weld gauge is equipped with
an output port
Data can be input into a computer or a
special printer via special connecting cable.
The working way
of the interface
Synchronous serialization
Data: Binary code, 24 bits Each datum
will be transferred twice. The cycle is
300ms(20ms in fact reading mode)
Transmitting time: 0.5ms